The Monash University grading system

Monash grades are High Distinction (80 to 100), Distinction (70 to 79), Credit (60 to 69), Pass (50 to 59) and Fail (below 50). Monash uses a Weighted Average Mark (WAM) as its main measure, and also reports a 7.0 GPA on your transcript. Its bands sit lower than at some universities, with a Distinction from 70 to 79.

The grades Monash uses

Monash reports results using five grade bands: High Distinction, Distinction, Credit, Pass and Fail. Each band covers a range of marks, and together they describe how you performed in a unit.

These grades are the building blocks of your academic record. Your WAM and any GPA are both derived from the marks behind them, so understanding the bands is the first step to understanding your results at Monash.

The grade bands in detail

Here are the Monash grade bands and their mark ranges. The exact boundaries are set by the university and apply across most units.

Monash’s grade bands sit lower than at some universities. Its High Distinction starts at 80, and its Distinction at 70, so the same mark can earn a higher grade at Monash than at a university with higher bands.

What counts as a top grade at Monash

At Monash, the highest grade, High Distinction, requires a mark of 80 or above. This is lower than the 85 that universities such as UNSW and Sydney use, so Monash’s bands sit lower, and a given mark can earn a higher grade at Monash.

So if you are aiming for top grades, 80 is the number to clear in each unit. Knowing this helps you see exactly how far a given mark is from the top band, and target the units where you are closest.

The pass mark

The pass mark at Monash is 50. A mark of 50 to 59 is a Pass, and anything below 50 is a fail. So 50 is the line you must clear to pass a unit and earn its credit points.

Passing matters for progression and for your record, since a fail usually counts as zero in your average and still consumes credit points. So clearing 50 in every unit protects both your progress and your WAM.

WAM and GPA at Monash

Monash uses a Weighted Average Mark (WAM) as its main measure, and also reports a 7.0 GPA on your transcript. So at Monash you have a WAM plus a GPA, with WAM as the primary figure.

The difference matters because the two can tell slightly different stories. WAM keeps the full detail of your marks, distinguishing a 71 from a 78, while GPA compresses both into the same band. See Monash WAM vs GPA for the full comparison.

For most Monash purposes, such as honours and awards, your WAM is the measure that counts. A GPA is useful mainly when an external body, such as an overseas university, asks for one.

The GPA point values

To turn your grades into a GPA, each grade maps to a point on the 7-point scale: High Distinction 7, Distinction 6, Credit 5, Pass 4 and Fail 0. You then take the credit-weighted average of those points.

This mapping is how a set of grades becomes a single GPA figure. Because larger units carry more credit points, they weigh more heavily in the result. See how to calculate your Monash GPA.

How fails and repeats work

A failed unit usually counts as zero in your WAM and GPA, and its credit points still count in the total you divide by. So a fail lowers your average in two ways: it contributes nothing, and it enlarges the denominator.

Some units can be repeated, and Monash’s rules determine whether the original fail still counts towards your average. Check the policy, since a repeated unit’s effect on your record depends on how the university treats it.

Non-graded results

Some Monash units are assessed on a satisfactory or pass-fail basis, without a graded mark. These usually sit outside your WAM and GPA, neither raising nor lowering them, because they carry no percentage to average.

So if your average does not match your own calculation, a non-graded unit may be the reason. Check which of your units are graded and which are not, since only graded units feed your WAM and GPA.

How Monash compares to other universities

Monash sets its High Distinction at 80 and its Distinction at 70, lower than universities such as UNSW and Sydney, and it uses WAM as its main measure alongside a 7.0 GPA. So a raw average does not always translate directly between institutions, and a grade name can mean different marks at different universities.

This matters if you are comparing offers, transferring, or applying elsewhere. Use Monash’s own bands for your Monash results, and each other institution’s bands for theirs, rather than assuming a single national standard.

Using your grades to plan

Knowing Monash’s bands helps you plan. Because each grade has a clear mark range, you can see how far a given mark is from the next band, and target the units where you are closest to a boundary.

This is useful for lifting your average efficiently. A few marks that raise your average, or cross a band boundary, are worth targeting. Understanding the bands turns your transcript into something you can actively work with.

Calculate your Monash GPA

Rather than work it out by hand, use our Monash GPA calculator. Enter your grades and credit points, and it applies the scale and credit weighting to give your GPA.

It is the quickest way to see where you stand, and to test how a grade in an upcoming unit would change your result.

Where to find your result

Your WAM, and any GPA, are shown in your Monash student portal and on your academic transcript, calculated automatically from your grades. So you rarely have to work them out by hand, though knowing the method helps you check them and plan ahead.

If you cannot find a figure you expect, it may be that Monash leads with a different measure, or shows it only on request. In that case you can calculate it yourself from your grades and credit points, or ask student administration.

Cumulative vs semester average

There are two averages worth knowing. Your semester average covers a single study period, while your cumulative average covers your whole degree so far. The cumulative figure is the one most programs and employers mean when they ask.

Watching both is useful. A strong semester average shows recent improvement, while your cumulative average shows your overall standing. If you are recovering from a weak start, your semester averages will rise before your cumulative one catches up.

How your average is rounded

Averages are usually reported to two decimal places. Monash rounds the final figure using its own rule, so a borderline average may round up or down depending on the exact policy.

This matters at a threshold. If a program requires a certain average and yours calculates just below it, whether it rounds up depends on Monash’s rounding rule. So when you are close to a cut-off, check how Monash rounds.

Why the bands matter

A few marks that cross a boundary, or simply raise your average, are worth targeting. Understanding the bands turns your transcript from a report card into a tool you can actively work with.

Lifting your grades

Because your average is built from your marks, small gains across several units add up. Targeting the units where you are near a boundary, using Monash’s academic support, and prioritising high-credit units all help lift your average efficiently.

So improvement is rarely one dramatic leap; it is steady, targeted effort across your program. See how to improve your GPA for more strategies that apply at Monash.

Using your grades to plan ahead

Once you understand Monash’s bands and how WAM and GPA work, use them to plan rather than just to worry. Knowing where you stand, and how much a strong grade in an upcoming unit would move your average, turns your record into a tool for decisions about honours, postgraduate study and electives.

So treat your average as a live number you can influence, not a fixed verdict. Understanding the bands and the weighting is what lets you steer it deliberately at Monash.